The other day, I decided to bust open one of my Cube World cubes to see what’s inside and to begin a plan to hack it. For those who don’t know, they’re little cubes with digital stick men living in them. They come in different characters and you can put a couple cubes together to make them interact like below:
Anyway, I’ve had them for about 6 months and I had been meaning to pull one apart and play with it, so I did. Here’s how they come apart:
(This is at your own risk)
1. Unscrew the back screw and remove the back panel / battery cover.
2. You now have access to 4 tiny screws via 4 tiny holes. Unscrew them with a tiny screwdriver.
3. Carefully pull the two halves apart. Careful, they’re still connected.
4. Pull the black connector panels from the inside to the outside.
5. You should now have access to 3 new screws. Unscrew them to pull out the display.
(that’s about as far as I go for now)
 |
 |
 |
 |
 |
 |
Once I got it apart, I realized that although it’s cool and all, I still have no idea what kind of hack I can do to it. First, I tried turning it back on to make sure that everything worked. No problem there. Then I messed with connections, shook him up, etc. I tried all sorts of things to make him do anything other than what is expected out of the box, to no avail. Then I connected him to another Cubie the right way, the wrong way, forwards, backwards, etc. Other than them both getting pissed off and duking it out, everything was fine.
 |
 |
 |
 |
 |
 |
(The whole set of full-sized images is here.)
As you can see, I haven’t accomplished anything too exciting yet. This is where I want your help. What should I do (or try to do) to him to make him work in a much different way than intended? I’m open to any suggestions, but if I wind up with something cool, I’ll give it away here later, so I’ll be trying to NOT break it.
Thoughts?
del.icio.us
Stumble it!
on February 1st, 2008 at 8:22 pm
Right on, good to see some Tech post’s from you!
Daily Tech Impressions’s last blog post..Sony’s Flexible OLED
on February 1st, 2008 at 10:27 pm
Yeah… I’m needing to get more out here. Keep watching. There’s more.
on February 2nd, 2008 at 9:01 am
Now, my brain does NOT work that way. I get so mad at my boys for taking toys and electronics apart! Maybe I should just let them play and see what they can do. Maybe it will make them rich one day, huh?
Well, they better leave my computer alone.
Qtpies7~’s last blog post..Friday chores
on February 2nd, 2008 at 9:42 am
Qtpies7: That’s how it all started for me. I just liked to take thing apart. When I was 9 or 10, I would pull apart my dad’s computer and then I’d have to get it working again before he got home. =) If they really wanna take things apart, the thrift stores are full of used gadgets that are cheap and all the innards follow most of the same principals. Just don’t let them electrocute themselves.
on February 3rd, 2008 at 1:37 pm
I’m no help at all — I never take apart my toys. At least not until they break on their own. Then I might take it apart.
Good luck figuring out your hack!
ê¿ê
Margaret’s last blog post..It’s Tax Time ? What Tax Program Is Your Favorite?
on February 3rd, 2008 at 7:40 pm
Margaret: I’m sure I’ll come up with something, but keep me in mind if you get any ideas.
on February 8th, 2008 at 4:16 am
It would have been nice if that dog can bite one of that stickies :)
beautiful minds’s last blog post..Ink catridges, from carrot inks
on February 8th, 2008 at 6:43 am
It pees on them. That’s just hilarious to see for the first time.
on May 31st, 2008 at 7:48 am
maybe use t to store things as it must hold a lot of memory?
on June 8th, 2008 at 8:51 am
The most popular Furby hack, from years ago, was to decode its IR communication protocol. Then a Palm Pilot app was written to send specific messages to the little gremlin. So, I would start outside the box and see what can be done to inject messages. Since you already have it open, maybe you can figure out why the instructions say not to use rechargeable batteries. Or, hack a solar cell into the thing. “Green” is very popular right now.
Cheers,
Aaron
on June 9th, 2008 at 5:34 pm
dan: I’m not sure about the memory capacity just yet.
Aaron: Sounds like a plan. It doesn’t look to easy to reprogram, but then I’m not a chips and circuits kind of guy (yet). One day I’ll have time to figure it out.
on November 6th, 2008 at 10:24 am
I bought a bunch of these for a party, all great fun, but now they see little use and many of them have dead batteries (perhaps storing them stuck together drains their juice?). At any rate, what would be cool is to power them through a 3v power supply and have them running continuously. The trick I am searching for is how to keep the cubes from going to sleep after 5 minutes. Maybe shorting a switch would do it?
on November 7th, 2008 at 11:27 am
steve o: I think the problem is that it’s all hard-programmed. It could be done, I’m betting, but it’d take some serious know-how and advanced tools, I think.
on November 10th, 2008 at 7:13 pm
make it so two people live in one cube and when u pull it apart they will stay in the cue they are in at the moment
on November 11th, 2008 at 3:54 pm
whatif you could make a dog in a no dog cube or reporgram mod.
on November 13th, 2008 at 1:30 pm
i just invented a hack i call revesral take out the gryo scope put it back in up side down And your charcter is upside down
on January 5th, 2009 at 4:24 pm
hacking the comms seems the best way to go, you do not even have to open the cube. then you should be able to get them to act as if they were stuck together.
Reprogramming the core data would be cool, instead of stick men have stick women !
on February 19th, 2009 at 8:31 am
Maybe if you connect some of the connectors then you can let it come to itself! :) Or you could build in a speaker that can connect to your mp3 player/IPod!
on February 23rd, 2009 at 9:08 am
The cubes make great travel games for kids. Whens part two of your article coming out? I could’nt find any updates!
on April 26th, 2009 at 8:50 am
I’ve been trying to hack cube worlds to. But I can’t figure out how to do it myself. And i have some ideas:
You could use some of the parts to make your own cube world out of it. So it can still interact with any other cube world (provided you keep the right stuff for it) And add some extra stuff to it. Make it mess with other cw when it’s’ connected, so its not even a stick person anymore. You could give it the power to kill &fight with other cube dudes. Or make a simple modification; like an off switch. You can make a little conrol pad to make him move around. And eventually multiple screens to add. I also got this idea for this one called a control cube. Something that fiddles with all the different cw connected to it. can make em go through one door and turn up four blocks up. Buttons to control ~slightly~ what happens to a random cube. & if u want, you can sell them.
I don’t know what you can do with all this. But atleast it can get u thinking.
on April 26th, 2009 at 9:03 am
Huh you know. I disasembled a working camera once. You could replace the screen. Try replacing stuff. Just messing around like that could actually spawn a working thing.
undirect interacting. might work…
on April 26th, 2009 at 9:07 am
I disasembled a working camera once. You could just randomly add or replace things. Maybe the programs would have equal variables. That means it would work a bit in some way. might work…